A Brandt company - serving Enterprise, NV

Lennox Furnace Repair in Enterprise, NV

AC repairAC repair
Furnace & heatingFurnace & heating
Heat pumpsHeat pumps
Ductless mini splitsDuctless mini splits
CarrierCarrier
TraneTrane
GoodmanGoodman
Every visit starts with

Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed

We have financing partners for your new heating and cooling system*On approved credit; ask us about your options

Diagnosis first, numbers second - you approve the repair price before a single part goes in.

Get your free estimate

Lennox Furnace Repair in Enterprise: What to Know First

We provide independent Lennox furnace repair in Enterprise, and most jobs we see here are diagnosed and repaired within a single visit, with the whole repair typically landing between $150 and $700. We’re an independent Lennox service provider, not affiliated with or authorized by Lennox, so our only loyalty is to getting your heat back on and the price you agreed to in writing before any work starts. If we have to order a part, we tell you exactly when it will arrive. Call (844) 797-9490 and a live person picks up, day or night.

Call (844) 797-9490

This page is for Lennox owners in Enterprise specifically: people with an older G-series or Elite furnace in a home that was never built for a real winter, wondering who to let through the door. We answer that plainly.

How Lennox Products Fail – and How We Fix Them

  • Hot-surface igniters that crack after a cold snap. On older Lennox G40 and G50 furnaces, the silicon nitride igniter takes far more thermal cycling than the furnace was rated for, and a 20-degree Enterprise morning after a mild week can snap it. We test the igniter with a meter before condemning it, then replace it with the correct OEM-spec part. A cheap universal igniter is the wrong shortcut here; it runs at the wrong resistance and fails twice as fast.
  • Inducer motor bearings that whine before they quit. Lennox high-efficiency models route flue gas through the inducer, and in Enterprise’s dry, dusty air those bearings dry out and start howling. Most owners hear the noise for weeks and assume it’s normal. When we catch it early, cleaning and re-mounting the motor saves the part; when the motor is already dragging voltage, it gets replaced.
  • Pressure switch faults on condensing units. On Lennox condensing furnaces, a pressure switch that won’t close is often a blocked or water-trapped hose, not a dead switch. We check the venting and condensate path first, which usually means a cheaper repair than the switch replacement the symptom suggests.
  • Cracked heat exchangers on furnaces past 15 years. This is the failure we take most seriously. Lennox heat exchangers in older units develop hairline cracks on the primary cells, and they can leak combustion gas into your supply air. We inspect and document, and if it’s cracked, we tell you a furnace replacement is safer than a patch. We won’t talk you into a repair we don’t believe in.
  • Thermostat and control board mismatches. Enterprise homeowners often swap a modern smart thermostat onto a 20-year-old Lennox control board and get short cycling or no heat at all. We check wiring and board compatibility before anyone replaces a control board, because half the time the old board is fine and the setup is wrong.
Explore

Styles & brands we work with

  • AC repair
  • Furnace & heating
  • Heat pumps
  • Ductless mini splits
  • Carrier
  • Trane
  • Goodman

Our Lennox Furnace Repair Process

  1. 1
    You call and get a live person. No voicemail, no callback queue, at any hour. We ask the model and what it’s doing so we can bring the right parts.
  2. 2
    We tell you who is coming. Before we arrive, you get our technician’s name and photo. Every tech is background-checked and identity-verified under the Threshold Verified standard, and shows a photo ID badge at the door. If anyone arrives you weren’t told to expect, that visit is on us and we make it right.
  3. 3
    Full diagnostic on your Lennox. We test ignition, gas pressure, heat exchanger, blower, and inducer, and explain in plain language what we found and what it means.
  4. 4
    Written price before we touch a screwdriver. You see the price for the parts and labor before any work starts, every time, no exceptions.
  5. 5
    OEM or quality aftermarket, your call. We explain the trade-off between original Lennox parts and quality aftermarket equivalents, including how it affects any remaining warranty, and let you decide.
  6. 6
    Repair, test, and written guarantee. We run the furnace through a full heat cycle and leave you a written guarantee. If the repair fails within 365 days, we return free of charge under the 365-Day Done Right Promise.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Lennox Furnace Repair Costs in Enterprise

Here’s what our Enterprise customers actually see for common Lennox furnace repairs, parts and labor included:

Repair Typical price
Igniter replacement $150 – $300
Pressure switch / venting fix $180 – $350
Blower motor replacement $350 – $650
Inducer motor replacement $450 – $700
Furnace tune-up $80 – $200

Most Lennox furnace repairs in Enterprise fall between $150 and $700. What moves the price: whether it’s an OEM part versus aftermarket, whether the control board is involved, and whether we’re working on a high-efficiency condensing model rather than a standard one. You get a written price before any work starts. Estimates are free. Call (844) 797-9490 for yours.

Why Enterprise Homeowners Call Brandt HVAC Enterprise for Lennox Work

Brandt comes from an old word for a firebrand, a fitting name for the work of keeping a home warm. That’s what we do, and we take the same care with who we send into your home. Our technicians have up to 23 years of experience, including a lot of time on Lennox furnaces, and every one of them is background-checked and badged before they knock. You get a written price before work starts and a written guarantee when we finish. If your other system is a Carrier or Trane, we handle those too, so you’re not hunting down a different company for the next call. Brandt HVAC Enterprise is part of the Threshold Group family of home-service companies, and each location is independently owned and operated.

FAQs

Does repairing my Lennox furnace affect my manufacturer warranty? No, provided the work is done correctly with compatible parts. We check your warranty situation before we recommend OEM or aftermarket parts, so a repair never costs you coverage you still have.

Can you get Lennox parts for my furnace? Yes. We source OEM-spec parts directly and carry common Lennox igniters and switches on hand. Less common boards can take a few days to arrive, and we’ll tell you the timeline upfront.

Should I repair or replace my Lennox furnace? Repair if the unit is under about 15 years old and the repair is a straightforward part swap. Replace if the heat exchanger is cracked or the repair costs more than half of a new furnace. We’ll give you both numbers honestly and let you decide.

How fast can you come out? Call (844) 797-9490 and a live person answers any hour. We can often get to a no-heat call in Enterprise the same day, and we don’t charge extra for overtime.

Do I have to be home for the repair? Yes, and we want you to be. You should see the technician’s ID badge and the written price before we start, which means you’re there when it happens.

Freezing in Enterprise with a furnace that won’t run? Call (844) 797-9490 now for a free estimate. A live person answers, we’ll tell you exactly who’s coming and when, and you’ll see the price in writing before we start.

Written by the team at Brandt HVAC Enterprise, serving Enterprise and nearby areas.

Need HVAC help nationwide? Licensed & insured · 30-60 min response · free estimates
Call (844) 797-9490
Local Service Coverage

Request a Free Estimate in Enterprise

Tell us what you need - Brandt HVAC Enterprise responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch