A Brandt company - serving Enterprise, NV
Furnace Repair in Enterprise, NV | Brandt HVAC Enterprise

Furnace Repair in Enterprise - Fixed Today, No Surprise Invoice

Same-day diagnosis with the repair price given before any work starts, and an honest repair-versus-replace answer when the system is near the end of its life.

We answer around the clock

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

AC repairAC repair
Furnace & heatingFurnace & heating
Heat pumpsHeat pumps
Ductless mini splitsDuctless mini splits
CarrierCarrier
TraneTrane
GoodmanGoodman
Every visit starts with

Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed

We have financing partners for your new heating and cooling system*On approved credit; ask us about your options

Diagnosis first, numbers second - you approve the repair price before a single part goes in.

Get your free estimate

Trusted Furnace Repair for Enterprise Homeowners

A furnace that quits in the middle of a cold snap is the kind of problem that needs a real answer, not a sales pitch. Most furnace repairs in Enterprise run $150 – $700, and we send a technician the same day in most cases. Our technicians have up to 23 years of experience, and they’ve seen the same failures over and over in this part of the valley: desert dust pulled in through the return, short heat-cycles on units sized for a bigger house, and heat exchangers stressed by a long summer of disuse. Every job starts with a written price before any work starts, every repair carries a written guarantee, and every call is answered by a live person. Call (844) 797-9490 and we’ll get you warm.

Call (844) 797-9490

If you’re weighing repair against replacement, our Furnace Repair in Enterprise pillar is a good place to start. And for everything else heating and cooling, our home page covers the full range of services.

Furnace Maintenance

Furnace Maintenance is the routine inspection and cleaning that keeps a heating system running safely and efficiently through the desert cold months. You need it once a year, ideally in early fall before the first cold night, because sitting idle through a Las Vegas Valley summer lets dust build up on burners, blower wheels, and filters. Brandt HVAC Enterprise runs a full maintenance visit that includes a burner check, a heat exchanger inspection, a flame sensor clean, a filter change, and a carbon monoxide safety test. Pricing for a tune-up runs $80 – $200, and if a repair turns up during the visit, you get a written price before we touch anything. There’s no pressure to buy anything else.

What a Maintenance Visit Covers

A maintenance visit checks ignition, combustion, airflow, and the safety switches that keep your family protected. We pull the burners if they need it, clean the flame sensor, and test the heat exchanger for cracks you can’t see from the outside. You get a written report of what we found and what (if anything) needs attention.

When to Schedule It

Book the visit before the first cold spell, before the system has been running hard for weeks. If you skipped last year and your furnace has been gathering dust, a visit now prevents the mid-winter breakdown that costs more to fix. It’s also the right call if you’re noticing odd smells or longer run times.

Explore

Styles & brands we work with

  • AC repair
  • Furnace & heating
  • Heat pumps
  • Ductless mini splits
  • Carrier
  • Trane
  • Goodman

Heat Pump Repair

Heat Pump Repair means diagnosing and fixing a system that heats and cools by moving refrigerant, not by burning fuel, and it covers everything from a failed reversing valve to a bad defrost board. You need it when the heat pump runs but doesn’t heat, blows cold air in heating mode, or ices up on the outdoor unit and won’t defrost. Brandt HVAC Enterprise sends a technician who tests refrigerant charge, checks the reversing valve, and confirms the compressor and fan are doing what they should. Heat pump repair in Enterprise usually runs $150 – $700, depending on whether it’s a sensor, a valve, or a more involved compressor job. We service Carrier, Trane, and Lennox heat pumps along with most other major brands.

Heating Mode Failures

When a heat pump blows cold air in winter, the culprit is often the reversing valve or a defrost control board that’s stuck. That’s a diagnostic we run on every heat pump call. We don’t guess – we test the charge and the valve before recommending anything.

Defrost and Ice Problems

An outdoor unit that’s coated in ice and won’t clear itself is a sign of a defrost cycle that has failed. Left alone, it strains the compressor and can lead to a bigger repair. We check the sensor and the board and get the cycle back on track.

Heating Repair

Heating Repair is the general service for any system that isn’t bringing enough heat, and it applies to gas furnaces, heat pumps, and electric units alike. You need it when the house won’t reach the thermostat setting, when you hear banging or rattling, or when the system cycles on and off every few minutes. Brandt HVAC Enterprise runs a full diagnostic that starts with airflow and combustion, then works through the ignition and control sequence until we find the actual cause. Heating repair in Enterprise runs $150 – $700 for most jobs, and you get a written price before we start. If the repair fails within the guarantee period, we come back at no charge under the 365-Day Done Right Promise.

Uneven Heat and Cold Rooms

A room that never warms up is often a duct or airflow problem, not a furnace failure. We check duct joints, dampers, and return size to see whether the heat is being lost before it reaches the room. Fixing that is often cheaper than replacing the system.

Short Cycling and Loud Operation

Constant on-off cycling wears out the ignition and blower faster and drives up your bill. It’s usually a sign of an oversized unit, a clogged filter, or a failing limit switch. We track down the cause rather than just resetting the system and leaving.

Boiler Repair

Boiler Repair covers the diagnosis and fix of a hot-water or steam boiler that’s not heating, leaking, or making noise. You need it when radiators stay cold, when you see water pooling near the unit, or when the boiler keeps shutting off on its safety limit. Brandt HVAC Enterprise checks pressure, the expansion tank, the circulator pump, and the ignition and control sequence to find what’s actually failing. Boiler repair in Enterprise typically runs $150 – $700, parts and labor included, and a written price comes before any work. Boilers aren’t common in every Enterprise home, but where they’re installed, they need a technician who reads pressure and flow correctly rather than treating them like a furnace.

Pressure and Leak Checks

A boiler that keeps losing pressure has a leak somewhere – in the system, the relief valve, or the expansion tank. We pressure-test the circuit and find it. Ignoring a slow leak can lead to corrosion inside the boiler and a much bigger bill.

Circulator and Zone Valve Problems

If some rooms heat and others don’t, the circulator pump or a zone valve is often the reason. We test the pump and each valve under load. A zone that’s not opening won’t deliver heat no matter how well the boiler is running.

Gas Furnace Repair

Gas Furnace Repair means fixing a furnace that burns natural gas or propane, and it covers ignition failure, flame problems, blower faults, and the safety switches that shut the unit down. You need it when the furnace won’t light, when you smell gas, or when the burners fire and then cut out within seconds. Brandt HVAC Enterprise treats every gas call with care: our technicians test for leaks, check the flame sensor and igniter, and confirm the heat exchanger is sound before restoring operation. Gas furnace repair in Enterprise usually runs $150 – $700, and you see a written price first. If you ever smell gas, leave the house and call your gas utility before calling anyone for a repair.

Ignition and Flame Sensor Faults

Most “furnace won’t light” calls trace back to a dirty flame sensor or a failed igniter. The sensor tells the furnace a flame is present, and when it’s coated it shuts the gas off as a safety measure. We clean or replace it and test the full light-off sequence.

Safety Checks We Don’t Skip

On any gas furnace, we inspect the heat exchanger and test for carbon monoxide before we call the job done. A cracked exchanger can put CO into your home’s air, and that’s not something we’ll leave to chance. This is why a real diagnostic matters more than a quick part swap.

Furnace Tune Up

Furnace Tune Up is a focused service for an aging or underperforming furnace that’s still running but not at its best. You need it when the system is louder than it used to be, when your heating bill creeps up, or when it’s been more than a year since the last service. Brandt HVAC Enterprise cleans the burners, checks and adjusts the flame, replaces the filter, balances airflow, and tests the safety controls – and then gives you a written report of what we found. A tune-up runs $80 – $200, and our technicians aren’t paid on what they sell, so there’s no incentive to push a part you don’t need. If something does need attention, you’ll see the price in writing before we touch it.

What Gets Cleaned and Adjusted

The blower wheel, burners, and flame sensor pick up dust and residue over a heating season. We clean them, check the belt and bearings, and adjust the flame if it’s running rich or lean. A clean, well-adjusted furnace burns less fuel and lasts longer.

Reading the Written Report

After the tune-up you get a written report of everything we checked and what we found. It’s a record you can keep, and it tells you plainly whether anything needs a follow-up. If a repair is needed, the price is on the page before we start.

Emergency Furnace Repair

Emergency Furnace Repair is the service for a furnace that fails when you need it most – overnight, on a weekend, or on a holiday when the house is getting cold fast. You need it when the heat goes out and there’s no safe way to wait until morning, especially with young children, older family members, or anyone who gets cold easily in the house. Brandt HVAC Enterprise answers the phone with a live person 24 hours a day, 7 days a week, and we send a background-checked, identity-verified technician who you’re told about by name and photo before arrival. Emergency furnace repair in Enterprise runs $150 – $700 for most calls, and you get a written price before any work starts. There’s no overtime upcharge for the timing.

Who We Send, and How You’ll Know

Before anyone knocks, you’ll get the technician’s name and photo, and the technician shows a photo ID badge at the door. This is the Threshold Verified standard, and it’s the reason many Enterprise homeowners choose us over a cheaper call. If someone arrives who you weren’t told to expect, that visit is on us and we make it right.

What to Do While You Wait

If you smell gas, don’t wait for us – leave the house and call your gas utility first. For a plain no-heat call, keep interior doors open so heat can circulate, and don’t run space heaters unattended. We’ll be there as quickly as we can, and we’ll tell you the written price before any repair begins.

Brands We Service

We service Carrier furnaces and know how their ignition and control boards behave when they get older. We also work on Trane equipment and recognize the specific ways Trane heat exchangers and blower assemblies wear with age. When a Lennox furnace starts short-cycling, we know where to look first. And we handle American Standard units, including the models that need a careful airflow check after a filter change.

If your system is a Goodman, Rheem, York, Daikin, or Bryant, we work on those too. The point isn’t the badge on the panel – it’s that the technician knows your equipment well enough to diagnose it correctly rather than guess. Whether you have Carrier, Trane, or any other make, we can help. Give us a call and tell us what the furnace is doing.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Signs You Need a Pro Right Now

  • You smell gas. A faint gas odor near the furnace means a possible leak, and that’s a leave-the-house call to your utility before a repair call. Once the utility clears it, we’ll check the furnace and the gas connections.
  • The furnace won’t light or keeps cutting out. A furnace that fires for a few seconds and shuts off is usually a flame sensor or igniter fault. That’s a safety shutdown, not a quirk, and it won’t fix itself.
  • The blower runs but there’s no heat. If you hear the fan but feel cold air, the ignition or gas valve may be the issue. We test the full sequence to find out which.
  • You hear banging, rattling, or scraping. Loose panels, a failing blower bearing, or debris in the wheel can cause this. Left alone, it turns into a bigger repair and a louder house.
  • Your carbon monoxide alarm goes off. Get everyone outside and call the fire department or your gas utility first. After that, a cracked heat exchanger or a blocked flue needs a professional inspection before the furnace runs again.

Our Process, Step by Step

  1. 1
    You call, a live person answers. No phone tree, no voicemail, any hour of the day. We ask what the furnace is doing and get a technician scheduled, often the same day.
  2. 2
    You’re told who’s coming. The technician’s name and photo arrive before the visit, and their photo ID badge is shown at the door. That’s the Threshold Verified standard at work.
  3. 3
    We diagnose before we quote. The technician tests airflow, combustion, ignition, and the safety switches, then explains what they found in plain language. No jargon, no guessing.
  4. 4
    You see a written price first. The price is on paper before any work starts. You can ask questions, approve, or decline, and there’s no pressure either way.
  5. 5
    We do the repair and back it with a written guarantee. If the repair fails within the guarantee period, we return at no charge under the 365-Day Done Right Promise. Every repair includes a written guarantee that states exactly what’s covered.

How Much Does Furnace Repair Cost in Enterprise?

Furnace repair in Enterprise usually costs $150 – $700, and most calls land in the middle of that range. A typical igniter replacement runs $150 – $300, while a flame sensor clean-and-replace is often on the lower end. A blower motor replacement can push toward the higher end. A failed gas valve or a more involved board replacement sits at the top of the range.

What moves the price: the part itself, how hard it is to reach, and how much diagnostic time the problem takes. A furnace that’s simply dirty is cheaper to fix than one with a cracked heat exchanger. Our written price before work means you’ll know the cost up front and won’t be surprised when the bill arrives.

How to avoid overpaying: get a written price before work starts, and skip anyone who won’t put it in writing. Ask what the guarantee covers and for how long. A contractor who can’t answer plainly is one to walk away from.

What’s included in a free estimate: a diagnostic visit, a plain-language explanation of what’s wrong, and a written price for the repair with parts and labor itemized. If you need a tune-up instead, that’s $80 – $200, and we’ll say so if that’s the better call. Call (844) 797-9490 for an exact quote. Estimates are free.

Our Service Area Near Enterprise

We serve Enterprise and the neighborhoods around it, and we make it out to nearby communities quickly on most calls. We also cover Furnace Repair in Spring Valley and Furnace Repair in Paradise, along with Summerlin, Winchester, Henderson, Whitney, Sunrise Manor, Las Vegas, North Las Vegas, Boulder City, and Sandy Valley. Response time depends on where you are, but a live person answers when you call and tells you when to expect us. Most no-heat calls get a same-day visit. If we can’t make it that day, we say so honestly and schedule the earliest available time.

Serving Enterprise, NV – Our Local Coverage Area

We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked Questions About Furnace Repair in Enterprise

Schedule Your Furnace Repair Service in Enterprise Today

When the heat is out, you want one call and a straight answer. Call Brandt HVAC Enterprise at (844) 797-9490 and a live person picks up – any hour, any day. You get a written price before work starts, a background-checked technician you’re told about by name and photo, and the 365-Day Done Right Promise behind every repair. Estimates are free. Let’s get your heat back on.

Written by the team at Brandt HVAC Enterprise.

Why Enterprise Chooses Brandt HVAC Enterprise

We set the standard for furnace repair in Enterprise.

30-60 Min Response

Fast dispatch across Enterprise. Same-day and after-hours emergency service available.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Enterprise

Getting your furnace repair handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your furnace repair needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Enterprise - typically within 30-60 minutes.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and 100% satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local furnace repair pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    A background-checked tech heads outLicensed & insured, typically within 30-60 min.
  4. 4
    You approve before work beginsNothing starts until you say go.

What Enterprise Customers Say

Trusted by homeowners across Enterprise and surrounding areas.

★★★★★

"Condenser fan motor replaced the same day. Clean, quick, and the quote didn't change."

Lamar R.
★★★★★

"We felt safe having them in the house. Polite and careful with the carpet."

Beverly D.
★★★★★

"Annual tune-up on the furnace. He cleaned the burners, tested the heat exchanger, and told me what was fine and what to watch. No scare tactics."

Lorraine E.

Ready for Furnace Repair in Enterprise?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Enterprise.

(844) 797-9490

Request a Free Estimate in Enterprise

Tell us about your furnace repair needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Local Service Coverage
Call Now - 24/7 Dispatch