A Brandt company - serving Enterprise, NV

Lennox HVAC Service in Enterprise, NV

AC repairAC repair
Furnace & heatingFurnace & heating
Heat pumpsHeat pumps
Ductless mini splitsDuctless mini splits
CarrierCarrier
TraneTrane
GoodmanGoodman
Every visit starts with

Seasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed

We have financing partners for your new heating and cooling system*On approved credit; ask us about your options

Diagnosis first, numbers second - you approve the repair price before a single part goes in.

Get your free estimate

Why Enterprise Homeowners Choose Lennox HVAC

We provide independent Lennox HVAC service in Enterprise, NV – AC repair, heat pump repair, and furnace repair – with technicians who know the brand’s specific failure points rather than treating it like any other system. Our work is different because we’ve repeatedly diagnosed the model-line quirks (communicating boards on the Signature Series, pressure switch problems on the Merit Series) that generic crews often chase in the wrong direction. Brandt HVAC Enterprise is not affiliated with or authorized by Lennox. We’re an independent service provider, and we bring that focused Lennox experience to every repair and replacement. Call (844) 797-9490 for a free estimate.

Call (844) 797-9490

Why Trust Brandt HVAC Enterprise for Your Lennox HVAC?

Lennox equipment has its own logic. The communicating systems in the Signature Series talk to their controls over a data bus, the Merit and Elite furnaces use pressure switches and high-limit safeties that trip for specific reasons, and the heat pump reversing valves behave in ways that surprise technicians who mostly see other brands. Our technicians have up to 23 years of experience, and a good share of that has been spent learning Lennox systems hands-on rather than reading a spec sheet.

We use OEM Lennox parts for the components where compatibility matters: communicating control boards, pressure switches, and heat exchangers. Factory parts keep the system talking to itself the way it was designed to. For capacitors, contactors, and ignitors, we’ll use quality aftermarket parts when they meet or exceed OEM specs – there’s no reason to pay factory prices on a part that doesn’t need the factory label.

Every Lennox repair in Enterprise starts with a written price before any work begins, so you know the cost before we touch the equipment. And every repair carries a written guarantee – if it fails within the guarantee period, we return at no charge under the 365-Day Done Right Promise. Our technicians are background-checked and identity-verified, sent to you by name and photo before the visit, with a photo ID badge shown at the door.

Explore

Styles & brands we work with

  • AC repair
  • Furnace & heating
  • Heat pumps
  • Ductless mini splits
  • Carrier
  • Trane
  • Goodman

Common Lennox HVAC Problems We Fix in Enterprise

Lennox builds solid equipment, but each model line has patterns. These are the ones we see most in Enterprise homes:

  • Signature Series communicating control boards (SL28XCV, SLP98V, SL280V). These boards can drop communication with the thermostat or throw error codes after power surges or as solder joints age. The system may run for a while, then stop responding to the thermostat entirely. It’s typically a board-level fault, and diagnosing it requires reading the communication codes correctly rather than guessing at the thermostat.
  • Elite and Merit Series high-limit switches tripping (EL16XC1, EL296V, EL280UH, ML193UH). A high-limit switch trips because of restricted airflow – usually a dirty evaporator coil or a failing ECM blower motor that’s not moving enough air. The switch is doing its job. The real fix is restoring airflow, not replacing the switch and calling it done.
  • Lennox heat pump reversing valve solenoids sticking (XP25 and other XP series). When the solenoid sticks, the system can heat in cooling mode or cool in heating mode. In Enterprise, that shows up as a heat pump that blows cool air in winter. Confirming valve coil voltage and checking the defrost board tells you whether it’s the solenoid, the board, or the valve body.
  • Induced draft blower assemblies on older Lennox furnaces (G50, G60). These assemblies seize or develop bearing noise, typically around the 10 to 12 year mark. A noisy inducer or a furnace that won’t light often traces back here, and the assembly usually needs replacement.
  • Pressure switch failures on Merit Series furnaces (ML193UH). A pressure switch that won’t close is a frequent no-heat call, and the cause is often a blocked condensate trap or a failing inducer motor. Cleaning the trap or replacing the inducer assembly usually resolves it.

A typical scenario: a Lennox Elite Series heat pump stops heating and blows cool air because the reversing valve solenoid has failed or the defrost board is stuck in defrost mode. A qualified technician confirms the valve coil voltage, checks the defrost sensor and board, and replaces the failed solenoid or board rather than the entire valve body when possible.

Lennox Parts & Our Repair-vs-Replace Approach

Parts strategy matters on Lennox systems. We use OEM Lennox parts for communicating boards, pressure switches, and heat exchangers because those components need factory compatibility to work correctly with the rest of the system. For capacitors, contactors, and ignitors, we’ll use quality aftermarket parts that meet or exceed OEM specs – that keeps the repair cost reasonable without cutting corners on the parts that matter.

We don’t claim to keep Lennox parts stocked locally. Parts are sourced for each job based on what the diagnosis calls for, and we’ll tell you upfront if a part needs to be ordered and what that means for timing.

On repair versus replace: if your Lennox system is over 12 to 15 years old and facing a compressor or heat exchanger failure, we give you an honest breakdown of both paths – what the repair costs, what a replacement runs, and what you get either way. We don’t default to a new install because it’s easier for us. If repair makes sense for your situation, we’ll say so. Call (844) 797-9490 and we’ll walk through it with you.

Our Lennox Service Process – Step by Step

  1. 1
    Diagnosis. We start by reading the specific fault codes your Lennox system is producing – communicating boards, pressure switches, and defrost controls all report differently. We confirm the actual failed component rather than replacing parts on a guess.
  2. 2
    Written price. Before any work starts, you get a written price for the repair, parts and labor included. You see the number and agree to it before we proceed.
  3. 3
    Repair or install. We use OEM Lennox parts where compatibility matters and quality aftermarket parts where they meet spec. For replacements, we match the new equipment to your home’s actual load and the existing ductwork.
  4. 4
    Test. After the repair, we run the system through a full cycle – cooling, heating, defrost if it’s a heat pump – and confirm the fault is cleared and the system is operating to spec.
  5. 5
    Written guarantee. Every repair comes with a written guarantee stating exactly what’s covered and for how long. If the repair fails within the guarantee period, we return at no charge under the 365-Day Done Right Promise.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Lennox Products We Service & Install in Enterprise

We service and install across the Lennox residential lineup. That includes the Merit Series (ML14XC1 and ML16XC1 air conditioners, ML193UH furnace), the Elite Series (EL16XC1 air conditioner, EL296V and EL280UH furnaces), the Signature Series (SL28XCV air conditioner, SLP98V and SL280V furnaces), and the Dave Lennox Signature Collection (XC25 and XC21 air conditioners, XP25 heat pump). Whether it’s a single-stage Merit system or a variable-capacity Signature setup with communicating controls, we diagnose and repair it. In Enterprise, where summer heat pushes systems hard for months, we also handle the tune-ups that keep these units from failing mid-July.

We Also Service These Brands

Lennox is a focus for us, not a limitation. Brandt HVAC Enterprise services all major residential HVAC brands, including Carrier and Trane, along with Goodman, Rheem, York, Daikin, Bryant, and American Standard. If you have a mixed fleet of equipment or you’re comparing a Lennox replacement against another brand, we can service and advise on both without steering you toward one label.

FAQs – Lennox HVAC Service in Enterprise

Is Brandt HVAC Enterprise authorized by Lennox? No. We are an independent service provider, not affiliated with or authorized by Lennox. We service Lennox equipment because our technicians have focused experience with the brand’s model lines and failure patterns, not because Lennox endorses us. Call (844) 797-9490 for a free estimate.

Do you use genuine Lennox/OEM parts? Yes, for the components where compatibility matters – communicating control boards, pressure switches, and heat exchangers. For capacitors, contactors, and ignitors, we use quality aftermarket parts that meet or exceed OEM specs, which keeps repair costs reasonable without compromising the parts that need factory compatibility.

How long does Lennox service take? Most Lennox repairs are completed in a single visit, typically one to three hours depending on the diagnosis. If a part needs to be ordered – a communicating board or a reversing valve solenoid, for example – we’ll tell you upfront what the timeline looks like and schedule the return visit.

What Lennox models/series do you cover? We cover the full residential lineup: Merit Series (ML14XC1, ML16XC1, ML193UH), Elite Series (EL16XC1, EL296V, EL280UH), Signature Series (SL28XCV, SLP98V, SL280V), and the Dave Lennox Signature Collection (XC25, XC21, XP25 heat pump).

Will service void my Lennox warranty? Proper service by a qualified technician doesn’t void your Lennox warranty, and using OEM parts on the components that require them helps preserve factory compatibility. We’ll tell you what your warranty covers and what it doesn’t before we start work. Call (844) 797-9490 with questions.

Service Typical Cost Range
AC Repair $150 – $650
Furnace Repair $150 – $700
AC Installation $3500 – $7500
Tune-Up $80 – $200

Every job starts with a written price before any work begins, so you see the exact cost upfront. Call (844) 797-9490 for an exact quote – estimates are free.

Book Your Lennox Service in Enterprise, NV

If your Lennox system needs repair or you’re weighing a replacement, call (844) 797-9490 for a free estimate. We’ll diagnose the specific model-line issue, give you a written price before any work starts, and back every repair with the 365-Day Done Right Promise. Our phones are answered by a live person 24 hours a day, and every technician is background-checked and introduced by name and photo before arrival.

Written by the team at Brandt HVAC Enterprise.

Need HVAC help nationwide? Licensed & insured · 30-60 min response · free estimates
Call (844) 797-9490
Local Service Coverage

Request a Free Estimate in Enterprise

Tell us what you need - Brandt HVAC Enterprise responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - 24/7 Dispatch